Monoprice 8134 Tone Generator Probe User Manual download pdf

FEATURES:

Red and black test leads are provided, and has a standard 4 conductor modular

cord and plug.

A 3-position toggle switch controls the modes of operation plus a 3-colored LED

Light Emitting Diode is provided for line polarity, continuity and voltage testing.

A tone selector switch, located inside the test set is provided for choosing either

a single solid tone or dual alternating tone.

(CAUTION: DO NOT CONNECT TO AN ACTIVE AC CIRCUIT EXCEEDING

24V IN THIS MODE.)

MAINTENANCE:

The Amplifier Probe is maintenance free except for battery replacement.

Remove the screw from the battery compartment, replace the 9V battery and

reassemble.

Warranty limited solely to repair or replacement; no warranty of merchantability,

fitness for a particular purpose or consequential damages.

INSTRUCTIONS:

1. Connecting the Tone Generator.

In terminated working cables:

Connect one test lead to a terminated wire and other test lead to earth or

equipment ground.

In unterminated or non-working cables:

Connect one test lead to an unterminated wire and the other test lead to

another unterminated wire.

2. Depress the round on/off spring-loaded button of the amplifier probe. The

volume control switch can be adjusted to suit the environment. Volume can

be increased to overcome noise, or decreased to reduce interference.

3. Touch the tip of the amplifier probe to the insulation of each suspect conductor.

4. Reception of tone will be loudest on the subject wire.

5. The plug receptacle is provided for connecting to a head set or hand set.

Tone GeneratorTone Generator

- 2 -

Tone Generator

Amplifier Probe

Red and black

test leads

3-colored LED

Test button

Speaker

Tip

4conductor

modular cord

and plug

User's Guide

PRO LAN TRACER / TONER

FEATURES:

The Amplifier Probe is designed to identify and trace wires or cables within a

group without damaging the insulation.

Works with any Tone Generator to identify wires.

Volume control for increased sensitivity and adjustable to suit work environment.

Recessed ON/OFF button prevents battery drain.

Power supply is in any 9V battery with a life of approximately 100 hours.

A plug receptacle is provided for head set or head phone.

Amplifier ProbeAmplifier Probe

- 1 -

Phone jack3-position

toggle switch

Volume control

1 2

Summary of Contents

Page 1 - PRO LAN TRACER / TONER

FEATURES: Red and black test leads are provided, and has a standard 4 conductor modular cord and plug. A 3-position toggle switch controls the

Page 2 - INSTRUCTIONS:

TESTING CONTINUITY USING TONE (SWITCH TO "TONE"): (CAUTION: DO NOT CONNECT TO AN ACTIVE AC OR DC CIRCUIT IN THIS MODE.) 1. Connect

Comments to this Manuals

No comments

Monoprice 8134 Tone Generator Probe User Manual

Browse online or download User Manual for Measuring instruments Monoprice 8134 Tone Generator Probe. Monoprice 8134 Tone Generator Probe User Manual

Summary of Contents

Comments to this Manuals